SAFETY DATA SHEET
Light Green SF yellowish, C.I. 42095
1. IDENTIFICATION
Product Identifiers
Product Name:
Light Green SF yellowish, C.I. 42095
Other Names:
Acid Brilliant Green 5; Acid Green 5; FD&C Green Number 2; Food Green 2; Pencil
Green SF C.I.42095; Light Green SF yellowish
Green SF C.I.42095; Light Green SF yellowish
Product Number(s):
C121, C1211, C1215
CAS Number:
5141-20-8
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a dangerous substance according to GHS.
Label Elements
Signal Words
None
Hazard Statement(s)
Not available.
Precautionary Statement(s)
Not available.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
Not available.
Environment
Not available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Acid Green 5
5141-20-8
-
-
4. FIRST AID MEASURES
Ingestion
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Inhalation
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Skin Contact
Wash off with soap and plenty of water. Consult a physician.
Eye Contact
Flush eyes with water as a precaution.
Other Information
Consult a physician. Show this safety data sheet to the doctor in attendance.
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11.
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
HAZCHEM
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Sodium oxides.
Special protective equipment and precautions for fire fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid breathing dust.
For personal protection see section 8.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and clean up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Conditions for safe storage
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Not available.
Personal protective equipment
Eye and face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail [email protected], test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use
scenario.
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail [email protected], test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use
scenario.
Body protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Crystalline
Odour
Not available.
pH
Not available.
Vapour Pressure
Not available.
Density
Not available.
Boiling Point
Not available.
Melting Point
288 °C - dec
Solubility
Not available.
Specific Gravity of Density
Not available.
Flash Point
Not available.
Flammable (Explosive) Limits
Not available.
Ignition Temperature
Not available.
Formula
C37H34N2Na2O9S3
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No further relevant information available.
Conditions to avoid
No further relevant information available.
Incompatible materials
Strong oxidising agents.
11. TOXICOLOGICAL INFORMATION
Acute effects
LD50 Oral - rat - > 2,000 mg/kg
Eye contact
No further relevant information available.
Skin contact
No further relevant information available.
Ingestion
No further relevant information available.
Inhalation
No further relevant information available.
Toxicity and irritation
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Toxicity to fish LC50 - Oryzias latipes - 1,000 mg/l - 48 h
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Sodium oxides.
UN Number
None
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
Marine pollutant.
Special precautions for users
No information available.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
Not listed.
Other Information
No further relevant information available.
16. OTHER INFORMATION
SDS preparation date
16 February 2018
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.