SDS

A listing of SDS's
SAFETY DATA SHEET
Decolouriser
1. IDENTIFICATION
Product Identifiers
Product Name:
Decolouriser
Other Names:
Decolourizer
Product Number(s):
AGSK-100
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use. Used as a Decolouriser in Microbiology Gram Staining.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Hazardous according to criteria of NOHSC.
Label Elements
Signal Words
Danger
Hazard Statement(s)
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
Precautionary Statement(s)
Risk Phrases:
R11 Highly flammable
Safety Phrases:
S2 Keep out of reach of children.
S7/9 Keep container tightly closed and in a well ventilated place.
S16 Keep away from sources of ignition - No smoking.
S23 Do not breathe fumes.
S33 Take precautionary measures against static discharge.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
Not available.
Environment
No further relevant information available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Acetone
67-64-1
~50%
-
Ethanol
64-17-5
~50%
-
4. FIRST AID MEASURES
Ingestion
If swallowed, DO NOT induce vomiting. Seek urgent medical assistance.
Inhalation
Remove victim to fresh air. Apply resuscitation if victim is not breathing - Administer oxygen if breathing is difficult. Transport to hospital or doctor immediately.
Skin Contact
If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with water and soap if available.
Eye Contact
If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eyelids are held open. Immediately transport to hospital or doctor.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use dry chemical, carbon dioxide or foam.
HAZCHEM
3YE
Special protective equipment and precautions for fire fighters
If possible to do so safely, shut off fuel to fire. Use water spray to spray to cool fire-exposed surfaces and to protect personnel. Avoid spreading burning liquid with water used for cooling fire exposed containers when using water spray, boil-over may occur when the product temperature reaches the boiling point of water.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Keep unnecessary people away; Isolate hazard area and deny entry. Stay upwind; Keep out of low areas.
Shut off ignition sources, no flares, smoking or flames in hazard area. Stop leak if you can do it without risk. Water spray may reduce vapour; but it may not prevent ignition in closed spaces.
Environmental precautions
Not available.
Methods and materials for containment and clean up
SMALL SPILLS:
Take up with sand, dirt or vermiculite. DO NOT use sawdust. Use non-sparking tools or HEPA vacuum system. Place into labeled drum(s) for later disposal.
LARGE SPILLS:
Notify Emergency Services (Police or Fire Brigade). Tell them exact location, nature, hazards, quantities, type of vehicle and any other information that would be helpful. Contain spill. Remove all ignition sources and safely stop flow of spill. Bund area. Trained personnel should wear Personal Protective equipment as highlighted in this MSDS. Blanket the spill with foam or use water fog to disperse vapour clouds. Consult an expert regarding disposal of this product.
7. HANDLING AND STORAGE
Precautions for safe handling
Check all fittings, valves, reticulation (piping) and any ancillary equipment for leaks. A supplied air respirator or a Self-Contained Breathing Apparatus (SCBA) for emergencies should be available and checked regularly. For further information please refer to the Engineering Controls of this MSDS.
Conditions for safe storage
Store in a cool place and out of direct sunlight. Store away from sources of heat or ignition, strong alkalis, acids, combustibles and oxidising agents. All equipment must be earthed. Store in original packages as approved by manufacturer.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Acetone
500 ppm
1185 mg/m³
1000 ppm
2375 mg/m³
Ethanol
1,000 ppm
1,880 mg/m³
-
-
Engineering controls
Highly flammable liquid. Maintain adequate ventilation at all times. Prevent accumulation of vapours in hollows or sumps. Eliminate any sources of ignition. Elevated temperature or mechanical action may form vapours, mists or fumes which may require local exhaust ventilation systems.
Personal protective equipment
Eye and face protection
Chemical goggles or face shield to protect eyes.
Skin protection
Gloves, (PVC or rubber)
Body protection
PVC or rubber apron.
Respiratory protection
Avoid breathing of vapours/gases. Select and use respirators in accordance with AS/NZS 1715/1716. When gases exceed the exposure standards then the use of a half-face respirator with organic vapour cartridge is recommended. For high concentration use an atmosphere-supplied, positive pressure demand self-contained or airline breathing apparatus, complying with the requirements of AS/NZS 1715 is recommended. Filter capacity and respirator type depends on exposure levels and type of contaminant.
If entering spaces where the airborne concentration of a contaminant is unknown then the use of a Self-contained breathing apparatus (SCBA) with positive pressure air supply complying with AS/NZS 1715 / 1716, or any other acceptable International Standard is recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Clear liquid.
Odour
Not available.
pH
Not available.
Vapour Pressure
233 hPa @ 20°C.
Density
Not available.
Boiling Point
56°C.
Melting Point
-95°C.
Solubility
Soluble in all proportions.
Specific Gravity of Density
Not available.
Flash Point
-20°C.
Flammable (Explosive) Limits
2.2 - 12.8% by volume.
Ignition Temperature
Not available.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under normal conditions of use.
Possibility of hazardous reactions
Emits oxides of carbon when heated to decomposition.
Conditions to avoid
Heat, flames, ignition sources and incompatible materials.
Incompatible materials
Reacts with oxidising agents/acid/alkalis/amines/alcohols.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
May cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision.
Skin contact
May cause irritation to the skin, with effects including; Redness and itchiness. Prolonged or repeated skin contact may lead to dermatitis.
Ingestion
May cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and lips and pains in the stomach.
Inhalation
May cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache and possible confusion.
Toxicity and irritation
Group 4: Probably not carcinogenic to humans.
12. ECOLOGICAL INFORMATION
Ecotoxicity
This substance may cause long term adverse effects in the environment.
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise flammable nature. Normally suitable for disposal by approved waste disposal agent.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
3YE

UN Number
UN1993
Proper shipping name
FLAMMABLE LIQUID, N.O.S. ( Acetone / Ethanol mixture )
Transport hazard class
3
Packing group
PG II
Environmental hazard
No information available.
Special precautions for users
Classified as a CLASS 3 (FLAMMABLE LIQUID) Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail, 6th Edition.

Dangerous goods of Class 3 (Flammable Liquid) are incompatible in a placard load with any of the following:
- Class 1
- Class 2.1, if both the Class 3 and Class 2.1 dangerous goods are in bulk
- Class 2.3
- Class 4.2
- Class 5
- Class 6, if the Class 3 dangerous goods are nitromethane
- Class 7
Emergency information (Transport):
Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)
For LIQUIDS - Highly flammable, Guide No: 14
Additional information
No further relevant information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
None allocated.
Other Information
No further information available.
16. OTHER INFORMATION
SDS preparation date
3 June 2016
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...