SDS

A listing of SDS's
SAFETY DATA SHEET
Conductive Carbon Graphite Paint
1. IDENTIFICATION
Product Identifiers
Product Name:
Conductive Carbon/Graphite Paint, SEM adhesive
Other Names:
Electrodag 15, Graphite Conductive Adhesive 154, Paint related material
Product Number(s):
I003
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use. Used as an adhesive to mount SEM samples.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Hazardous according to criteria of Hazardous Substances Information System [HSIS Worksafe Australia].
Label Elements
Signal Words
Danger
Hazard Statement(s)
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
Precautionary Statement(s)
Risk Phrases:R10 Flammable.
R11 Highly flammable.
R22 Harmful if swallowed.
R36 Irritating to eyes.
R37/38 Irritating to respiratory system and skin.
R41 Risk of serious eye damage.
R67 Vapours may cause drowsiness and dizziness.Safety Phrases:S2 Keep out of reach of children.
S7/9 Keep container tightly closed and in a well?ventilated place.
S16 Keep away from sources of ignition ? No smoking.
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39 Wear suitable gloves and eye/face protection.
S46 If swallowed, seek medical advice immediately and show this container or label.
Primary route(s) of entry
No further relevant information available.
Human Health
Inhalation:
No further relevant information available.
Ingestion:
No further relevant information available.
Eyes:
No further relevant information available.
Skin:
No further relevant information available.
Environment
No further relevant information available.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Isopropyl alcohol
67?63?0
66%
?
Graphite
7782?42?5
15%
?
n?Butyl alcohol
71?36?3
5
?
Hexylene glycol
107?41?5
5
?
Propylene glycol monomethyl ether
107?98?2
5
?
4. FIRST AID MEASURES
Ingestion
Keep individual calm and seek medical attention.
Inhalation
If affected, remove individual to fresh air; if breathing is difficult, administer oxygen; if breathing has stopped, give artificial respiration and seek medical attention immediately.
Skin Contact
Wash with soap and water; remove contaminated clothing and launder before reuse. If irritation occurs/persists seek medical attention.
Eye Contact
Flush eyes with water, lifting upper and lower lids occasionally, and seek medical attention immediately.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Foam, carbon dioxide, dry chemical.
HAZCHEM
2SE
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Not available.
Environmental precautions
Not available.
Methods and materials for containment and clean up
Remove all sources of ignition and ventilate area; apply absorbent material and transfer to containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid prolonged inhalation of mists or vapours. Wear protective clothing when handling. Wash thoroughly after handling.
Conditions for safe storage
Store in a cool, dry place away from heat and sources of ignition. Store with lid tightly sealed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
67?63?0 Isopropyl alcohol
400ppm
983mg/m3
500ppm
1230mg/m3
7782?42?5 Graphite
?
3mg/m3
?
?
107?41?5 Hexylene glycol
25ppm
121mg/m3 ? PEAK Limitation
?
?
71?36?3 n?Butyl alcohol
50ppm
152mg/m3 ? PEAK Limitation
?
?
Propylene glycol monomethyl ether, Cas 107
100ppm
369mg/m3
150ppm
553mg/m3
Engineering controls
Provide sufficient mechanical ventilation to maintain exposure below the National Exposure Standards.
Personal protective equipment
Eye and face protection
Wear chemical splash goggles.
Skin protection
Wear solvent resistant gloves.
Body protection
No special equipment deemed necessary under normal usage.
Respiratory protection
If the TLV of the product is exceeded, a mechanical or self?contained breathing apparatus is advised.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Thixotropic Black Fluid.
Odour
Sharp odour.
pH
Not available.
Vapour Pressure
31.00
Density
Not available.
Boiling Point
Not available.
Melting Point
Not available.
Solubility
Partially soluble in water.
Specific Gravity of Density
.89
Flash Point
12°C (tagged closed cup).
Flammable (Explosive) Limits
Not available.
Ignition Temperature
Not available.
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under normal conditions of use.
Possibility of hazardous reactions
Will not occur.
Conditions to avoid
Keep away from sparks, open flames or other sources of ignition and incompatible materials.
Incompatible materials
Strong Oxidizers.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
May cause severe irritation, burning sensation, blurred vision.
Skin contact
Repeated or prolonged contact can cause irritation and dermatitis.
Ingestion
Can cause gastrointestinal irritation, nausea, vomiting and diarrhoea.
Inhalation
Excessive inhalation of vapours or mists can cause nasal and respiratory irritation, dizziness, nausea, and headache.
Toxicity and irritation
Group 3: Not classifiable as to its carcinogenicity to humans.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Not available.
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Other adverse effects
No further relevant information available.
13. DISPOSAL CONSIDERATIONS
General information
Consult with Federal, State and local waste regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
2SE

UN Number
UN1263
Proper shipping name
Paint
Transport hazard class
3
Packing group
PG III
Environmental hazard
No information available.
Special precautions for users
Not available.
Additional information
No further relevant information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
None Allocated.
Other Information
No further information available.
16. OTHER INFORMATION
SDS preparation date
13 June 2016
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
References
List of Publications referenced when creating this MSDS;
? Hazardous Substances Information System Consolidated Lists: Safe Work Australia.
? APPROVED CRITERIA FOR CLASSIFYING HAZARDOUS SUBSTANCES [NOHSC:1008(2004)] 3rd Edition: National Occupational Health and Safety Commission.
? Dangerous Goods ? Initial Emergency Response Guide (SAA/SNZ HB76:1997).
? IATA Dangerous Goods Regulations.
? Adopted National Exposure Standards for Atmospheric Contaminants in the Occupational Environment [NOHSC:1003(1995)].
? Australia Standard for the Uniform Scheduling of Drugs and Poisons [SUSPD] (Australian Government Department of Health and Ageing).
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...