SDS

A listing of SDS's
SAFETY DATA SHEET
DMP-30
1. IDENTIFICATION
Product Identifiers
Product Name:
DMP-30
Other Names:
N/A
Product Number(s):
C053-25
CAS Number:
90-72-2
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS05 Corrosion
Skin Corrosion 1C H314 Causes severe skin burns and eye damage.
Eye Damage 1 H318 Causes serious eye damage.
GHS07
Acute Toxicity - Oral 4 H302 Harmful if swallowed.
Label Elements
Signal Words
Danger
Hazard Statement(s)
Hazard-determining components of labelling:
'2,4,6-tris(dimethylaminomethyl)phenol

Harmful if swallowed.
Causes severe skin burns and eye damage.
Precautionary Statement(s)
Do not breathe dusts or mists.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Remove person to fresh air and keep comfortable for breathing.
Ingestion:
Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.
Eyes:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label)
If eye irritation persists: Get medical advice/attention.
Skin:
Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
Environment
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
2,4,6-tris(dimethylaminomethyl)phenol
90-72-2
50-100%
-
4. FIRST AID MEASURES
Ingestion
Call for a doctor immediately. Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Inhalation
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
use neutralising agent.
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Conditions for safe storage
No special requirements.
Keep container tightly sealed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles
Skin protection
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation .
Material of gloves.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. ·
Penetration time of glove material.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Protective clothing.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device that is independant of circulating air.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Light yellow liquid
Odour
Amine-like
pH
11.3
Vapour Pressure
<0hPa
Density
0.98g/cm3
Boiling Point
156.1°C
Melting Point
Undetermined.
Solubility
Fully miscible
Specific Gravity of Density
Not determined.
Flash Point
148.9°C
Flammable (Explosive) Limits
Not applicable.
Ignition Temperature
382.2°C
Formula
Not determined.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
No further relevant information available.
Eye contact
Strong caustic effect.
Strong irritant with the danger of severe eye injury.
Skin contact
Strong caustic effect on skin and mucous membranes.
Ingestion
No further relevant information available.
Inhalation
No sensitising effects known.
Toxicity and irritation
The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version:
Harmful
Irritant
Corrosive
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
General notes: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Rinse off of bigger amounts into drains or the aquatic environment may lead to increased pH-values. A high pH-value harms aquatic organisms. In the dilution of the use-level the pH-value is considerably reduced, so that after the use of the product the aqueous waste, emptied int drains, is only low water-dangerous.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging.
Recommendation:
Disposal must be made according to official regulations.
Recommended cleansing agent: Water, if necessary with cleansing agents.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.

UN Number
UN2735
Proper shipping name
2735 AMINES, LIQUID, CORROSIVE, N.O.S
Transport hazard class
8 Corrosive substances
Packing group
PG III
Environmental hazard
Not applicable.
Special precautions for users
Warning: Corrosive substances.
Stowage Category: A
Segregation Code: SG35 Stow 'separated from' SGG1-acids.
Additional information
SG35 Stow "separated from" acids.·
Limited quantities (LQ)
5L ·
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 1000 mL
15. REGULATORY INFORMATION
Poisons Schedule Number
None of the ingredients is listed.
Other Information
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
SDS preparation date
22 November 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...