SAFETY DATA SHEET
PELCO® High Performance Ceramic Adhesive
1. IDENTIFICATION
Product Identifiers
Product Name:
PELCO® High Performance Ceramic Adhesive
Other Names:
Not available
Product Number(s):
16026, 16026-10, I026
CAS Number:
Not available.
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS07 - Irritant
Eye Irrit. 2A H319 Causes serious eye irritation.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
Skin Irrit. 2 H315 Causes skin irritation.
Label Elements
Signal Words
Warning
Hazard Statement(s)
GHS Hazard Determining Components:
Silicate Solution
Aluminium Oxide
H303 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
Silicate Solution
Aluminium Oxide
H303 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
Precautionary Statement(s)
P264 Wash hands thoroughly after handling.
P280 Wear protective gloves. Wear eye protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P332+P313 If skin irritation occurs: Get medical advice/attention.
P305+P351+P338 IF IN EYES: Remove contact lenses, if present and easy to do. Rinse cautiously with water for several minutes.
P301+P312 IF SWALLOWED: Call a poison centre or doctor if you feel unwell.
P362 Take off contaminated clothing and wash before reuse.
P501 Dispose in accordance with local, regional, national or international regulations.
P280 Wear protective gloves. Wear eye protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P332+P313 If skin irritation occurs: Get medical advice/attention.
P305+P351+P338 IF IN EYES: Remove contact lenses, if present and easy to do. Rinse cautiously with water for several minutes.
P301+P312 IF SWALLOWED: Call a poison centre or doctor if you feel unwell.
P362 Take off contaminated clothing and wash before reuse.
P501 Dispose in accordance with local, regional, national or international regulations.
Primary route(s) of entry
Ingestion, skin absorption.
Human Health
Inhalation:
Mist may cause irritation to respiratory tract.
Ingestion:
May cause irritation to mouth, oesophagus and stomach.
Eyes:
May cause moderate irritation to eyes.
Skin:
May cause moderate irritation to skin.
Environment
See Ecological Information (Section 12)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Aluminium Oxide
1344-28-1
40-60%
Not Available
Silicate solution
1312-76-1
20-30%
Not Available
Water
7732-18-5
20-30%
Not Available
4. FIRST AID MEASURES
Ingestion
If swallowed, do not induce vomiting. If victim is conscious and alert, give 1-2 glasses of water to drink. Do not give anything by mouth to an unconscious person. Seek medical attention immediately.
Inhalation
In case of inhalation due to spray mist, machining dust or dried particulate, remove source of exposure and assure that victim is breathing. If not breathing, administer cardio-pulmonary resuscitation (CPR).
Skin Contact
Immediately wipe excess material off skin with a dry cloth then wash with soap and water for at least 5 minutes.
Eye Contact
Hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek immediate medical attention, preferably with an ophthalmologist.
Other Information
Medical conditions possibly aggravated by exposure: Inhalation of product may aggravate existing chronic respiratory problems such as asthma, emphysema or bronchitis. Skin contact may aggravate existing skin disease.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
This material is compatible with all fire-extinguishing media.
HAZCHEM
This material is non-combustible.
Special protective equipment and precautions for fire fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear chemical goggles, body-covering protective clothing, chemical resistant gloves, and rubber boots. Use NIOSH approved respirator where mist occurs.
Environmental precautions
Not available.
Methods and materials for containment and clean up
Mop up and neutralize liquid, then discharge to sewer in accordance with federal, state and local regulations or permits. Flush area with water to complete clean-up. Exercise caution during neutralization as heat may be generated. Dispose of waste according to Federal, State and Local regulations.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with eyes, skin clothing. Avoid breathing spray mist. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills.
Conditions for safe storage
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Engineering controls
Use with adequate ventilation. Keep containers closed. Safety shower and eyewash fountain should be within direct access.
Personal protective equipment
Eye and face protection
Wear chemical goggles.
Skin protection
Wear body-covering protective gloves.
Body protection
Wear protective clothing.
Respiratory protection
This product is not considered breathable in either the liquid or cured forms. However, if the cured product is polished, ground or chipped during processing, handling or use, powders may be released as airborne particles that could be inhaled. In these instances, appropriate personal protection equipment and local ventilation controls must be employed. If exposure limits are exceeded, and local ventilation is unavailable, a supplied-air respirator or self-contained NIOSH-approved dust and mist respirator is required.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Viscous white paste
Odour
Odourless
pH
11.0-11.5
Vapour Pressure
NA
Density
ND
Boiling Point
100°C
Melting Point
NA
Solubility
Soluble
Specific Gravity of Density
2.30
Flash Point
NA
Flammable (Explosive) Limits
NA
Ignition Temperature
NA
Formula
NA
10. STABILITY AND REACTIVITY
Reactivity
Will not occur.
Chemical stability
This material is stable under all conditions of use and storage.
Possibility of hazardous reactions
None.
Conditions to avoid
Prolonged contact with aluminium, brass, copper, lead, and zinc may produce flammable hydrogen gas.
Incompatible materials
Gels and heats when mixed with acid. May react with ammonium salts resulting in evolution of ammonia gas.
11. TOXICOLOGICAL INFORMATION
Acute effects
Silicate solution, 1344-09-8
LD50 Oral, 1153 mg/kg (rat)
LD50 Inhalation, ND
LD50 Dermal, 4640 mg/kg (rabbit)
LD50 Oral, 1153 mg/kg (rat)
LD50 Inhalation, ND
LD50 Dermal, 4640 mg/kg (rabbit)
Eye contact
Irritating to eyes.
Skin contact
Irritating to skin.
Ingestion
Not available
Inhalation
Not available
Toxicity and irritation
Suspected carcinogen.
12. ECOLOGICAL INFORMATION
Ecotoxicity
This material is believed to be practically non-toxic to aquatic life.
Persistence and degradability
This material is believed to persist in the environment. This material is inorganic and not subject to biodegradation.
Bioaccumulative potential
This mater is not expected to bioconcentrate in organisms.
Other adverse effects
Sinks and mixes with water. Only water will evaporate from this material.
13. DISPOSAL CONSIDERATIONS
General information
Federal, State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
This material is non-combustible.
UN Number
Not regulated.
Proper shipping name
Not regulated.
Transport hazard class
Not regulated.
Packing group
Not regulated.
Environmental hazard
Not regulated.
Special precautions for users
Not regulated.
Additional information
Not regulated.
15. REGULATORY INFORMATION
Poisons Schedule Number
This product does not contain any reportable substances.
Other Information
Proscitech make no warranty of any kind regarding the information furnished herein. Users should independently determine the suitability and completeness of information from all sources. While this data is presented in good faith and believed to be accurate, it should be considered only as a supplement to other information gathered by the user. It is the User's responsibility to assure the proper use and disposal of these materials as well as the safety and health of all personnel who may work with or otherwise come in contact with these materials.
16. OTHER INFORMATION
SDS preparation date
2 March 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.