SAFETY DATA SHEET
Clear-mount
1. IDENTIFICATION
Product Identifiers
Product Name:
Clear-Mount (with Tris Buffer)
Other Names:
N/A
Product Number(s):
17985-12, 17985-15, IM032
CAS Number:
26628-22-8
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS07
Acute Tox. 4 H302 Harmful if swallowed.
Acute Tox. 4 H302 Harmful if swallowed.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Harmful if swallowed.
Precautionary Statement(s)
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
If swallowed: Call a poison center/doctor if you feel unwell.
Rinse mouth.
Store in a dry place. Store in a closed container.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Do not eat, drink or smoke when using this product.
If swallowed: Call a poison center/doctor if you feel unwell.
Rinse mouth.
Store in a dry place. Store in a closed container.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Not available.
Ingestion:
Rinse mouth.
Call a POISON CENTER/doctor if you feel unwell.
Call a POISON CENTER/doctor if you feel unwell.
Eyes:
Not available.
Skin:
Not available.
Environment
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
sodium azide
26628-22-8
≤ 2.5%
-
4. FIRST AID MEASURES
Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Generally the product does not irritate the skin.
Eye Contact
Rinse opened eye for several minutes under running water.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions
No special measures required.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
7. HANDLING AND STORAGE
Precautions for safe handling
No special precautions are necessary if used correctly.
Conditions for safe storage
Store in a dry place. Store in a closed container.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
sodium azide
-
-
0.11 ppm
0.29 mg/m³
Engineering controls
Wash hands before breaks and at the end of work
Store in a dry place. Store in a closed container.
Store in a dry place. Store in a closed container.
Personal protective equipment
Eye and face protection
Goggles recommended during refilling.
Skin protection
Wash hands before breaks and at the end of work.
Protection of hands
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Protection of hands
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
No information available.
Respiratory protection
Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Fluid
Odour
Characteristic
pH
Not determined.
Vapour Pressure
23 hPa at 20 °C
Density
Not determined.
Boiling Point
Undetermined.
Melting Point
Undetermined.
Solubility
Not miscible or difficult to mix with water
Specific Gravity of Density
Not determined.
Flash Point
Not applicable.
Flammable (Explosive) Limits
Not applicable.
Ignition Temperature
Product is not selfigniting.
Formula
Solvent content:
Organic solvents: 0.0 %
Water: 83.3 %
Organic solvents: 0.0 %
Water: 83.3 %
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
Stable under normal conditions
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
LD/LC50 values relevant for classification:
26628-22-8 sodium azide
Oral LD50 27 mg/kg (rat)
Dermal LD50 20 mg/kg (rabbit)
26628-22-8 sodium azide
Oral LD50 27 mg/kg (rat)
Dermal LD50 20 mg/kg (rabbit)
Eye contact
No irritating effect.
Skin contact
No irritating effect.
Ingestion
No further relevant information available.
Inhalation
No sensitising effects known.
Toxicity and irritation
No further relevant information available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Not known to be hazardous to water.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Recommendation
Disposal must be made according to official regulations.
Recommendation
Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.
UN Number
None.
Proper shipping name
Not regulated.
Transport hazard class
Void
Packing group
None.
Environmental hazard
No
Special precautions for users
Not applicable.
Additional information
No information available.
15. REGULATORY INFORMATION
Poisons Schedule Number
TLV (Threshold Limit Value established by ACGIH)
26628-22-8 sodium azide A4
26628-22-8 sodium azide A4
Other Information
Australian Inventory of Chemical Substances&l
16. OTHER INFORMATION
SDS preparation date
28 June 2022
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.